630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation

Get high-quality 630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation direct from the factory. Contact us for a quote today!
Request a Quote

PRODUCTS DETAILS

Basic Info.

HS Code
8504901900
Production Capacity
2000

Product Description

630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation


630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation


 The European type substation, is a complete set of new power transformer equipment developed by our company on the basis of transformation of national urban network making the optimal combination for the oil-immersed sealed power transformer and high and low voltage electrical components. Through structure optimization, the switchgear shall be miniaturized to extreme extent which greatly reduce the occupied area of the combined transformer with such advantages as small volume, low noise, reliable power supply, reasonable structure, blexible for installation, easy for operation and capable of going deep into the load center to maximum extent, etc.It can assemble network automation terminal (FTU) in the high-voltage ring network cabinet, realize the reliable detection of short circuit and single-phase grounding fault, and has the function of "four remote", which facilitates the automatic upgrade of network distribution. It is widely used in residential quarters commercial centers stations industrial and mining enterprises airports railroads schools hospitals, high-rise buildings and places.
630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation
The Specification 
Item Units High-voltage electrical apparatus Transformer Low-voltage
Rated voltage KV 4/10 6/0.4 10/0.4 0.4
Rated capacity KVA       50~1600  
Rated current A 200/400/630   100~3200
 
Rated short circuit breaking current
A load switch 400-630   15~63kA
KA The combination switch 
depends on the fuse
   
Rated short time withstand current KA 16,20(4s)   15(1s)
  30(1s)
Rated peak withstand current KA 31.5,50   30
     63
 
power frequency withstand voltage(1min)
 
 
KV
Opposite and interphase
32/42
25/35(oil type) ≤0.3,2
isolating distance
36/48
20/28(dye type) >0.3,2.5
 
 
Lightning impact voltage (peak)
 
 
KV
Opposite and interphase  
 
 
60/75
 
60/75  
isolating distance  
70/85  
Noise level 55db
Protection grade IP23
Executive standard GB/T17467
DL/T537
Our workshop
630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation


Note:1.All products will be tested before delivery.
2.All products can be customized.



HFY Certificate and Services 630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation
1.Pre sale service
a. make technical solution
b. send quotation, technical data sheet and drawing
c. prepare power transmission plan, testing plan and shipment plan
2. In sale service
a. supervise the manufacturing schedule totally in accordance with the plan
b. send photos to customer during every manufacturing process(hold point)
c. inform the customer one week before testing.
3. After sale service
a. installation and commissioning, training the workers
b. quick response within 12 hours any time
c. provide 12 months guarantee period normally.

Conditions of Use

1.The maximum ambient air temperature shall not exceed 40°C, and the minimum shall not below -25°C;

2.The altitude shall not exceed 1000m. If special customized transformers and low-voltage components are used, the altitude can reach 4,000m;

3.The vertical inclination is no more than 5°, and no violent vibration and impact;

4.The air humidity is not more than 90% (25°C);

5.No gas and conductive dust that will seriously affect the insulation of transformer,no explosion hazard and corrosion of electrical components;

6.Outdoor wind speed shall not exceed 35m/s;

7.If service conditions beyond the above, specially customized product is available.
630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation
Packaging & Shipping

630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation
For the shipping , we accept EXW, FOB and CIF terms, you can use your own shipper or ours.
Fasten: To use steel wires to fasten the large products in container to make sure it is stable enough.

The Finished Power Project 
630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation


Our Team  630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation
we are the large-scale electric complete sets of manufacturers in China, specializing in oil-immersed transform ers, dry-type transformers, high-voltage Cabinets, low-voltage cabinets and substa tion manufacturing specialized electrical enterprises. We can provide good quality and pretty competitive price.

FAQ
Q1: Is OEM/ODM available?
A1: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.
Q2: What's your MOQ?
A2: One Set.
Q3: How is the delivery time?
A3: It depends your order quantity and it normally takes about 15-20 days.
Q4: How do you control the quality?
A4: We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.Every product will be fully assembled and carefully tested before packing and shipping.
Q5: How long is the warranty?
A5: Within one year from the sale date, if there are any accessory problems, you just provide the photos of damaged accessory, then we will provide free accessory. According to the number of products, we will provide easily damaged accessories for free. We also can provide technical support if you need.
630kVA Electrical Prefabricated Power Distribution Equipment Transformers Substation
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours